Coral Proteção Sol & Chuva Ice White: Cool-Toned Facade Paint
Ice White adds a cool tone to Coral's waterproof facade paint line, common in contemporary architecture. See technical data and surface prep.
Contemporary facades with metal frames and straight volumes tend to favor Ice White, a shade that carries a subtle blue undertone rather than the neutral read of the standard White in the same Coral Proteção Sol & Chuva line. Swapping between shades doesn’t change what’s underneath: the same protection against infiltration, cracks, algae and mold.
Technical data
Classified under ABNT NBR 11702 (09/2019), type 4.5.16. Forms a flexible rubberized film. VOC 1.5 to 24.0 g/L; solids by volume 41% to 47%.
Application
Coverage up to 85 m² per 18 L container (75 m² for 16 L). 10% dilution, 3 coats as reference, touch-dry in 30 minutes, between coats in 4 hours, full cure in 24 hours.
Surface preparation
New render: wait 30 days to cure, or use a wall primer. Mold: wash with water and bleach in equal parts, wait 6 hours, rinse and dry completely. Freshly textured surface: 2 coats of wall primer first.
Technical specification
| Field | Specification |
|---|---|
| Line | Coral Proteção Sol & Chuva Pintura Impermeabilizante |
| Color | Ice White |
| Classification | ABNT NBR 11702 (09/2019), type 4.5.16 |
| Coverage | Up to 85 m² per 18 L |
FAQ
Does Ice White show old moisture stains more than neutral White?
The contrast between a residual moisture stain and a cool, light tone tends to be more visually noticeable; there is no specific technical data documented on this.
Does this color fit facades with straight lines and metal frames?
It is often associated with that style, but this is a design choice, not a technical recommendation from the manufacturer.
Does Ice White have a different coverage than White?
No. The coverage of up to 85 m² per 18 L is the same across the line, regardless of color.
How do I treat a structural crack before applying this color?
Cut it into a V-groove, prime it, then pack the gap with a sand-and-product fill (2-3 parts sand to 1 part product) over polyester mesh before closing with at least 3 finish coats.
Does this color need more coats than the others?
No, the 3-coat reference is the same across the whole line.
Does Ice White protect against algae the same way as other colors?
Yes, the same film prevents and fights infiltration, cracks, algae and mold, in any color.
Can I apply this color on a light rainy day?
Not recommended. Avoid rainy days, temperatures below 10°C or above 40°C, and relative humidity above 85%.
How long between coats of this color?
4 hours between coats, with full cure at 24 hours.