Coral Decora Diamante Semi-Gloss: High Resistance Paint for Interior Walls
CERAMIC Technology semi-gloss paint with high resistance and easy cleaning for interior walls. See Coral Decora Diamante specifications.
CERAMIC Technology is the core of Coral Decora Diamante, a premium acrylic semi-gloss paint built for high resistance, easy cleaning and a sophisticated finish. It gives walls a smoother touch, resulting in a more even, level film with more vivid colors, ideal for rooms that see frequent contact and cleaning.
Characteristics
- Smoother, more even film compared to conventional premium semi-gloss paint
- More vivid colors
- High resistance
- Easy to clean
- Odorless within 3 hours after application, when instructions are followed and the room is ventilated
Classified under ABNT NBR 11702, Type 4.5.10, in compliance with NBR 15079-2. Developed for interior wall decoration, with the option to also be used outdoors.
Technical data
Composition: modified acrylic resin, active and inert pigments, surfactants, coalescents, thickeners, microbicides, other additives and water. Volume solids of 33% to 39%; weight solids of 38% to 50%; viscosity of 82 to 125 KU; specific gravity of 1.077 to 1.280 g/cm³; VOC of 7.2 to 26.9 g/L; flash point above 100°C.
A study conducted by the Perception institute (report #14-41600-04/04-03-14-V01) found that 84.6% of surveyed consumers rated the odor as weak or absent within 3 hours of application, in a ventilated room.
Application
Coverage of up to 110 m² per 18 L container (98 m² for 16 L, 22 m² for 3.6 L, 19 m² for 3.2 L, 5.5 m² for 900 ml, 4.9 m² for 800 ml), which can vary depending on the surface type and color. Dilution of up to 20% (5 parts paint to 1 part potable water). 2 to 3 coats, applied with a short nap wool roller, spray gun, brush or trim brush. Touch-dry in 30 minutes, recoat time of 4 hours and final drying time of 4 hours.
Available in ready-mix colors (3.6 L and 18 L) and in the tinting system (800 mL, 3.2 L and 16 L).
Surface preparation
- In good condition (painted or unpainted): sand and remove dust with a damp cloth.
- Plaster, concrete or cement block: sand, remove dust and apply wall primer (except over skim coat plaster, which requires a specific product).
- New render: wait at least 30 days, sand, remove dust and apply acrylic sealer; without that waiting period, apply wall primer instead.
- Weak render, lime-painted walls or loose parts: remove loose material, sand, remove dust and apply wall primer.
- Small imperfections: correct with interior or exterior filler before painting.
- Mold: wash with an equal-parts water and bleach solution, wait 6 hours, rinse and let dry completely before painting.
- Moisture: resolve the underlying cause before painting.
- Gloss: sand until the gloss is removed and remove dust.
- Grease: wash with water and neutral detergent, rinse and let dry completely.
- Do not apply on rainy days, at temperatures below 10°C or above 40°C, or when relative humidity is above 85%.
Technical specification
| Field | Specification |
|---|---|
| Line | Coral Decora Diamante Semi-Gloss |
| Classification | ABNT NBR 11702, Type 4.5.10, compliant with NBR 15079-2 |
| Recommended surfaces | Interior walls, with option for exterior use |
| Composition | Modified acrylic resin, active and inert pigments, surfactants, coalescents, thickeners, microbicides, other additives and water |
| Dilution | Up to 20% (5 parts paint to 1 part water) |
| Application tool | Short nap wool roller, spray gun, brush or trim brush |
| Number of coats | 2 to 3 |
| Touch-dry time | 30 minutes |
| Recoat time | 4 hours |
| Final drying time | 4 hours |
| Coverage | Up to 110 m² (18 L), 98 m² (16 L), 22 m² (3.6 L), 19 m² (3.2 L) |
| Packaging | Ready-mix: 3.6 L and 18 L. Tinting system: 800 mL, 3.2 L and 16 L |
FAQ
What makes semi-gloss different from a matte finish?
Semi-gloss reflects more light than matte, which enhances color depth perception and makes cleaning easier, though it also highlights surface irregularities more than a matte finish would.
Can Coral Decora Diamante be used outdoors?
It is developed with a focus on interior wall decoration, but it can also be used in exterior areas.
How many coats does Coral Decora Diamante require?
2 to 3 coats, which can vary depending on the surface type and the color chosen.
What is CERAMIC Technology?
It is the exclusive technology behind Coral Decora Diamante responsible for a smoother touch on the wall, resulting in a smoother, more even film with more vivid colors.
What is the coverage of an 18-liter can of Coral Decora Diamante?
Up to 110 m², which can vary depending on the surface type and the color.
How should Coral Decora Diamante be diluted before application?
Dilute up to 20%: 5 parts paint to 1 part potable water, mixing thoroughly with a plastic, metal or wood spatula before use.
Does Coral Decora Diamante have a strong smell?
According to a study by the Perception institute, 84.6% of consumers rated the odor as weak or absent within 3 hours of application, in a ventilated room.
Can Coral Decora Diamante be applied over a wall with mold?
Before painting, wash the area with an equal-parts water and bleach solution, wait 6 hours, rinse thoroughly with water and let it dry completely.
What tools can be used to apply Coral Decora Diamante?
A short nap wool roller, spray gun, brush or trim brush, depending on the size and type of the area being painted.